Boiler water treatment
eazy BWT-1 is a liquid treatment designed to inhibit scale formation and corrosion within the marine boiler circuit.
eazy BWT-1 is a uniquely blended liquid boiler treatment programme designed to inhibit scale formation and corrosion within the boiler circuit. The product contains additives to inhibit scale when hard water breakthrough occurs, inhibit corrosion in the boiler circuit as well as the condensate lines and scavenge minor traces of oil. The conditioned feed water will form a loose, non-adhering sludge that can easily be removed by blow down.
The polymeric phosphate dispersants and corrosion inhibitors meet FDA requirements and the product does not contain hydrazine.
It is recommended that product be used with good quality feed water and dosed into the feed water line after the feed water re-circulation off take. This should be done by diluting with distilled water or condensate and dosed over a 24 hour period.
Initial dosage depends on the prevailing boiler condition and the quality of the feed water. In general the dosage rate should be 2.5 to 5.0 litres per tonne of water.
Maintenance dosage should be 0.5 to 2.5 litres per day depending on test results.
Eazychem boiler water test kits are used to monitor dosage and control parameters. These simplified tests are listed on the dosage and control charts. It is recommended that regular testing be carried out to ensure that levels of treatment and control are correct.
Blow down may be necessary to reduce the amount of dissolved and suspended solids. This should be done in accordance with the boiler manufacturer’s instruction.
Health and Safety
Please refer to the Material Safety Data Sheet and Product Label for specific information.
Limitation of Liability
Eazychem’s standard terms and conditions of sale, available on request, apply and contain limitations on any liability that may be incurred by Eazychem arising in any way from the sale and use of products supplied by Eazychem.